Tuesday 17th - Making a start
It was time to make a start on the general sanding down (or more accurately "meshing" down?) on the sides of TSO 4867. So time to dig out our new Mirka system.
Up to now we had just used 240 grade mesh to flat down new paint on 25451. As this was a more basic job we tried 80 grade and even the 60 grade that had been supplied. Stu starts off with the small appliance using 80 grade.
I started with 60 grade on the circular appliance and that certainly did the job. While I was busy elsewhere Stu took over the circular appliance and over the course of the day, with me occssionally helping, made quite an impression on the Cotswold side of the coach.
![]() |
[Photo : Paul E] Derek and Paul sre noe reconstructing the Malvern side of the Shark Ballast Plough van.
Ian got going on top coating SK 25451's battery box covers ..........
......... and then painted the cleaned up interior of the Cotswold side box.
The Malvern side box was a different matter with the base somewhat rotten. Phil lends a hand with the removal of old wood.
Chris meanwhile measured up a piece of strong plyboard. Phil helps with a trial fitting.
The board was then given a good coating of preservative.
When fitted the new base will be painted along with the rest of the box.
The Malvern side centre door needs a new footboard. The old board was easy enough to remove, but not the rusted in bolts, especially with the limited base between the board supports and the bodyside.
Meanwhile David was able to undercoat (where not done) and later top coat all the five remaining footboards.
With 25451's top coating now finished, it is time to begin lining out. Roger had his first go at this, initially marking out in pencil using one of Rod Wells' little gauges, and then applying the tape ready to do the gold band first.
With both tapes in place, time to add the Gold paint.
We apply two coats and then carefully remove the tape.
Ainsley was approaching on the tower so Roger moved round to the Cotswold side and did both top and bottom gold bands on the north end section.
Overall he did a very good job.
While Roger marks out the tape position, David top coats the nearby footboard.
Ainsley gave the roof a good overall vacuuming, especially as we have extra pipes and can extend to well over the middle section.
A nice surprise was to have Maurice visit us. He had cycled from Cheltenham, over Cleeve Hill. Maurice recently retired, but with his Retired Volunteers Pass he can visit us and keep in touch as well as having free train rides.
Black 5 45110 has now gone, but instead we now have small Prairie 5526. I caught the engine on its return to Toddington, having brought Rake 1 to Winchcombe (apologies for the blur).
























Comments
Post a Comment