Posts

Friday 23rd - Maintenance

The usual suspects had a visit to Winchcombe this week, and a Type A external and internal exams on the maroon buffet car…

Lots of the things described before for the Type C exams with some extras like buckeye coupling exams, which are checked for correct operation and wear. The jaw openings are checked for min/max clearance using a sheet metal gauge which either does/doesn’t fit through the open jaws if they are within spec…


…the first narrower bit should fit through, but the wider bit shouldn’t. The picture above also shows the knuckle pin which should rotate…
These are just two of the 19 things that we have to check on every buckeye every year. Once the exam has been done and passed the buffer beam is marked in chalk to show when the exam was last done…
The gangway end doors are checked for operation and that they can be secured to prevent opening. The north end was ok, but the south end door had lifted with the damp floor swelling up. The lock was failing to hook into the plate in the door pillar. Normally this is not a problem as there are a couple of brackets on the outside that can be secured together with a keyed lever, but because the swollen floor was pushing up the door these did not align…
…all we could do in time available was secure the door with a wooden baton wedged behind it and leave it to the main team to address over subsequent days. The door was originally locked, but after unlocking it to check the operation we couldn’t relock it! One of the hose seals was found to be split and was replaced…
One of the sliding quarter light windows had a broken frame so cable ties were secured around the catches/handles to prevent it being opened. Another slid past the closed stop but was otherwise usable. Both will need attention from the main team to rectify. During the morning a frog was given a helping hand from the Winchcombe swimming pool by Ian…

and potentially re-helped from it in the afternoon, it was difficult to tell if it was the same one or not. We are claiming two frogs helped!

Wednesday 21st .... So whats happening today?

 This week we will start in the upholstery dept.

They are hidden away and rarely seen.

This is Dave, he is always happy to pose.

Jenny assures me she is reloading

the bobbin .... I know nothing about sewing!

To produce this custom made arm rest cover.
Looks easy 🙈. It isn't.
Meanwhile in the workshop the bolster is carefully lowered into the bogie
and bolted into position. We have made some new spring seat shims of varying thickness,
this makes it a bit easier to get a level ride once the body is reunited with its bogies.
A lot of pushing and shoving is needed to get everything to line up.
Bryan is putting the finishing touches to the aforementioned shims.
These are roughly cut with Oxy/Acetylene and hand finished to get the exact size.
Everyday at Winchcombe throws up new challenges, Ken was tasked to remove these somewhat
defunct pipes from highly prized couplings.
Rex and Gerry then spent a while wire brushing these radiator covers, and then a coat of red oxide.
A little job for me, straightening this bracket ..... a swift turnaround.
'The Gas Axe' makes light work of a substantial piece of steel.
Rod was putting some finishing touches at roof level to 1808 in the paintshop.
We still have 2 doors to refit on the Malvern side, more of that next week.
Des is making the inside of 1808 look very posh.
Dave in the carpentry shop is making a superb job of the replacement
battery boxes on 16221.
After lunch we need a small shunt involving 16221, a steam pipe and me. Here John Hamer is coupling up prior to moving.
Rod insisted on taking this photo of me and saying this is the 'Blogger',
Its good fun though, I just occasionally abandon my work and dash around getting as many shots of the action as possible.
Bryan is the one with hair!
It was yet another very busy day, always a challenge.
Finally I couldn't leave Phil out, he is continuing with cleaning and greasing the sliding door ball race runners.
Des Adams will be doing the pics for next Wednesday, I will be in on Thursday.

Tuesday 20th - Considerable Progress

We had ten in today, all fairly scattered throughout the Paintshop, Barn and Upholstery Shop. Overall there was considerable progress.

Beginning with the black lining out on the Cotswold side of RMB 1808, Richard completed the south end and centre door. The yellow had all been done by Alex on Saturday along the whole length of this side.

At the north end Roger managed to complete the bottom line and half of the top. Considering that this was his first time at lining out, he made a very good job of it.

Unfortunately with very little of the yellow 25 mm tape left, we have to wait until we can acquire a new batch before continuing. The cheaper cream tape is only used for lining out if we have no other option - it doesn't give such a crisp edge.

[News flash: Alex says that the tape order will arrive this week and he will deliver it on Saturday Further news flash, they're in the hallway waiting to go, phew! - Ed. ]

On the opposite side Phil and Maurice second top coated the lower brown panelling.

Allowing for plenty of hardening time, it shouldn't be long before we can line out this side.

John was back on underframe painting. We only do what is really necessary, often bearing in mind the state of the equipment below the sole bar and what it would take to try and clean it all up. Bogies are rarely done of course. However on the occasions when the underframe has been grit-blasted and primed by the contractor, we often do as much as we can, which makes for a stunning overall appearance for the coach.
And then there are the charging points on both sides and the fuse box. Our Electrics Team like these freshened up with new red paint. We do too!



 
On the other side the sole bar was being tackled by Maurice and Phil.

The battery box by Maurice has already been done, including cleaning out the base of the interior which had become a sticky mess. The old fabric was removed and a waterproof sealant applied.

In the far distance John is painting the buffers and other parts around the buffer beam.

 

Phil and John then moved to the south end to so the same.

This just leaves the chequer plate and a little more painting on the corridor end door. The rain cover above the connection looked as though it hadn't been tidied up, so we need to check this too.


The saddle for one of the buffer extenders at this end of the coach was in a bad way and very loose. As such it was removed. Its replacement is narrower and the holes need to be bored.
The missing centre door on the Malvern side was in too bad a state to be save and the skin was transferred to our metal skip. Its replacement is one of the later aluminium doors, which Ainsley is cleaning up and adding filler where necessary.
The final job was the application of our base undercoat Light Grey. It means that when the door is eventually fitted we won't have a serious preparation job to do, not a nice thing to contemplate when the rest of the coach is fully painted up.




Enjoying the peace and quiet of the Upholstery Shop, Dave is tackling the removal of the covering and filling from this seat base.

 

 

 

 

I watched him working on this for a while and could see what a tricky job it was. You have to get into the limited space to cut away the ties from the outer springs and thus free up the hessian undercover.

Moving to the Barn and CK 16221, Derek has been busy rebuilding the floor in the south end (2nd Class) toilet compartment. The floor struts are now in place and have been given a coat of preserver.

 

 

The new toilet floor, cut to shape and ready to fit. It did with a bang! And it fitted very well.

He later appeared with the frame sections all cut and shaped for the north end (1st Class) toilet.

For Alan it was back on the sanding down of the masses of filler that have been applied to this coach.
Bob initially worked on the Cotaswold side and then moved across to the other side. There's even more filling on this side, both to sand down and needed.

Understandably mention of filling and sanding on 16221 is often greeted with a "Oh no, have I got to?" look, but we must get on with this. Endless preparation can become boring, but eventually work on 1808 will cease and we will have to move on.

Just in time to catch the last run of the day with Dinmore Manor returning to Toddington. There were good numbers on both trains today which was very heartening to say the least.

Just before leaving for home, a final shot of 1808 with top coating and lining out at this end and on this side now completed.

Monday 19th - Yo Yo Numbers

 Last week just 4 for Carriage Cleaning (OK, I was one of the missing ones), this week there were 8.  And a nice sunny autumn day.  Is the Social Distancing OK?!


Monday can be a busy work day at Toddington.  Today Friends of Toddington were painting as well as gardening.  Book shop door (sorry Malcolm, no pic) and a white line in the centre of the driveway.  One of the unexpected consequences of meeting Covid one way systems on the platform has meant passengers leaving a train often meet cars coming down the drive for the next trip.  A longer term solution is in hand but for now the white line will help guidance.  Also the repaired pavement alongside the back of the station building is now finished so again that will help separate pedestrians and traffic.  

 

Saturday 17th - Lockdown Beginning to bite

 It was very quiet for a Saturday, only 9 in, plus John H who went to change a steam hose before spending the morning on the CK's bogie (which I missed, sorry!). With some of our members coming from more northerly directions, outskirts of Birmingham etc. I suppose the worsening pandemic situation and new restrictions in some parts of the country are beginning to affect us. Others are snatching holidays while they still can.

With that in mind, Dave concluded that we (read "I") really ought to crack on with lining out RMB 1808.


So I did, doing both the top and bottom yellow lines on the Cotswold side. Care had to be taken with the masking tape a the paint is still quite fresh, but I managed to keep everything intact.

I missed a photo of Dave taking all the old masking tape off around windows and the like, but caught him finishing off some scotches:


At the other end of the paintshop Pam found a myriad of bits and pieces to paint and varnish:


Into the workshop, but still on 1808, Bob was preparing one of the doors we had to take off:


By the end of the day it was in undercoat grey. This is great, there's nothing worse than having to sand down and prep a door after it's been re-hung if the rest of the carriage has been top-coated in the intervening time.

Also in the workshop, John was drilling some holes in brackets for the P'way team who came begging:


We charge very reasonable rates.


Dave H was still collating and cleaning up various components for CK 16221. We think we've tracked down most of them now, that's the trouble with restarting on old restoration, it's hard to remember what bits were taken off and stored "somewhere safe" and which bits we never had and the spares store needs to be searched!

Also on the CK was George, progressing with the prep work on the body side.


 I know it doesn't look much different from last week, but trust me, it feels a lot better!

Meanwhile On BSK 34929 Steve was continuing with the panelling in the north vestibule...


While Ken was working on the corridor connections, with the body prep all done last week this allowed Ken to continue putting everything back together.

And finally, Dave had a nice shot with the Autumn light on Thursday, but no train. Today resolved that with the last train of the day, pleasingly well filled, hauled by Dinmore Manor passing through Winchcombe.